Mirroring – Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 813

Brocade Mobility RFS Controller System Reference Guide
801
53-1003099-01
15
To view the upgrade statistics:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select
Device U
pgrade.
FIGURE 34
Wireless Controller - AP Upgrade screen
The Upgrade screen displays the following information:
Mirroring
NX4524 and NX6524 model service platforms have the ability to mirror data packets transmitted
or received on any of their GE ports (GE port 1 - 24). Both transmit and receive packets can be
mirrored from a source to a destination port as needed to provide traditional spanning functionality
on the 24 GE ports.
Upgraded By Device
Displays the MAC address of the controller or service platform that performed the upgrade operation.
Type
Displays the model type of the device receiving a firmware update from the provisioning controller or
service platform.
Device Hostname
Displays the administrator assigned hostname of the device receiving the update.
History ID
Displays a unique timestamp for a device upgrade event.
Last Update Status
Displays the status of the last upgrade operation (Start Upgrade, Update error etc.).
Time Last Upgraded
Displays the date and time of the last successful upgrade operation.
Retries Count
Displays the number of retries made in an update operation.
State
Displays the current state of the Access Point upgrade (done, failed etc.).
Clear History
Select the Clear History
button to clear the screen of its current status and begin a new data collection.
Refresh
Select the Refresh button to update the screen’s statistics counters to their latest values.