Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 963)

Brocade Mobility RFS Controller System Reference Guide 951
53-1003099-01
15
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Select Firewall and expand the menu to reveal its sub menu items.
4. Select NAT Translations.
FIGURE 147 Access Point - Firewall Nat Translation screen
The NAT Translations screen displays the following:
DHCP Snooping
Firewall
Protocol Lists the NAT translation IP protocol as either TCP, UDP or ICMP.
Forward Source IP Displays the source IP address for the forward NAT flow.
Forward Source Port Displays the source port for the forward NAT flow (contains ICMP ID if it is an ICMP flow).
Forward Dest IP Displays the destination IP address for the forward NAT flow.
Forward Dest Port Destination port for the forward NAT flow (contains ICMP ID if it is an ICMP flow).
Reverse Source IP Displays the source IP address for the reverse NAT flow.
Reverse Source Port Displays the source port for the reverse NAT flow (contains ICMP ID if it is an ICMP flow).
Reverse Dest IP Displays the destination IP address for the reverse NAT flow.
Reverse Dest Port Displays the destination port for the reverse NAT flow (contains ICMP ID if it is an ICMP flow).
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.