Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 888)

876 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
2. Select a Wireless Controller node from the left navigation pane.
3. Select Sensor Servers from the left-hand side of the controller or service platform UI.
FIGURE 92 Wireless Controller - Sensor Server screen
The Sensor Servers screen displays the following:
Captive Portal Statistics
Controller Statistics
A captive portal redirects an HTTP client to a Web page (usually for authentication purposes) before
authenticating for Internet access. A captive portal turns a Web browser into an authenticator. This
is done by intercepting packets (regardless of the address or port) until the user opens a browser
and attempts to access the Internet. At that time, the browser is redirected to a Web page requiring
authentication.
To view the controller or service platform captive portal statistics:
1. Select the Statistics tab from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select Captive Portal from the left-hand side of the controller or service platform UI.
IP Address Displays a list of sensor server IP addresses. These are sensor resources available to the controller or
service platform.
Port Displays the port on which this server is listening.
Status Displays whether the server is connected or not connected.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values