Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 766)

754 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
8. Refer to the WLANs table to review RF Domain WLAN, radio and client utilization. Use this
information to help determine whether the WLANs within this RF Domain have an optimal radio
and client utilization.
9. The Clients by Band bar graph displays the total number of RF Domain member clients by their
IEEE 802.11 radio type.
10. The Clients by Channel pie charts displays the channels used by RF Domain member clients
using 5GHz and 2.4GHz radios.
11. Periodically select Refresh to update the contents of the screen to their latest values.
Devices
RF Domain Statistics
The Devices screen displays RF Domain member hardware data, connected client counts, radio
data and network IP address.
To display RF Domain member device statistics:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Select Devices from the RF Domain menu.
Client Count List the number of connected clients to each listed RF Domain member Access Point.
Radio Lists each radio’s administrator defined hostname and its radio designation (radio 1, radio 2 etc.).
Radio Band Lists each client’s operational radio band.
Location Displays system assigned deployment location for the client.