Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 857)

Brocade Mobility RFS Controller System Reference Guide 845
53-1003099-01
15
FIGURE 66 Wireless Controller - Network ARP screen
The ARP Entries screen displays the following:
Route Entries
Network
The Route Entries screen displays data for routing packets to a defined destination. When an
existing destination subnet does not meet the needs of the network, add a new destination subnet,
subnet mask and gateway.
To view the route entries:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Expand the Network menu from the left-hand side of the UI.
4. Select Route Entries.
IP Address Displays the IP address of the client being resolved on behalf of the controller or service platform.
ARP MAC Address Displays the MAC address of the device where an IP address is being resolved.
Type Defines whether the entry was added statically or created dynamically in respect to network traffic.
Entries are typically static.
VLAN Displays the name of the virtual interface where the IP address was found.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.