Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 707)

Brocade Mobility RFS Controller System Reference Guide 695
53-1003099-01
13
Once a target device has been selected its debugging information displays within the NETCONF
Viewer by default.
FIGURE 5 UI Debugging screen - NETCONF Viewer
2. Use the NETCONF Viewer to review NETCONF information. NETCONF is a tag-based
configuration protocol for Brocade devices. Messages are exchanged using XML tags.
3. The Real Time NETCONF Messages area lists an XML representation of any message
generated by the system. The main display area of the screen is updated in real time.
4. Refer to the Request Response and Time Taken fields on the bottom of the screen to assess
the time to receive and respond to requests. The time is displayed in microseconds.
5. Use the Clear button to clear the contents of the Real Time NETCONF Messages area. Use the
Find parameter and the Next button to search for message variables in the Real Time
NETCONF Messages area.