Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 984)

972 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
FIGURE 164 Wireless Client - Health screen
The Wireless Client field displays the following:
Client MAC Displays the factory encoded MAC address of the selected wireless client.
Hostname Lists the hostname assigned to the client when initially managed by the controller, service platform or
Access Point.
Vendor Displays the vendor name (manufacturer) of the wireless client.
State Displays the current operational state of the wireless client. The client’s state can be idle, authenticated,
roaming, associated or blacklisted.
IP Address Displays the IP address the selected wireless client is currently utilizing as a network identifier.
WLAN Displays the client’s connected Access Point WLAN membership. This is the WLAN whose QoS settings
should account for the clients’s radio traffic objective.
Radio MAC Displays the Access Point radio MAC address the wireless client is connected to on the network.
VLAN Displays the VLAN ID the Access Point has defined for use as a virtual interface with the client.