Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 819)

Brocade Mobility RFS Controller System Reference Guide 807
53-1003099-01
15
The Wireless Clients screen displays read only device information for wireless clients associated
with the selected controller or service platform. Use this information to assess if configuration
changes are required to improve network performance.
To view a controller or service platform’s connected wireless client statistics:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select Wireless Clients from the left-hand side of the UI.
FIGURE 40 Wireless Controller - Wireless Clients screen
The Wireless Clients screen displays the following:
Client MAC Displays the hardcoded MAC address assigned to the client at the factory and can not be modified.
The address displays as a link that can be selected to display configuration and network address
information in greater detail.
IP Address Displays the unique IP address of the client. Use this address as necessary throughout the applet
for filtering and device intrusion recognition and approval.
Hostname Displays the hostname (MAC addresses) of connected wireless clients. The hostname displays as a
link that can be selected to display configuration and network address information in greater detail.
Role Lists the client’s defined role within the controller or service platform managed network.
Client Identity Displays the unique vendor identity of the listed device as it appears to its adopting controller or
service platform.
Vendor Displays the name of the client vendor (manufacturer).
Band Displays the 2.4 or 5 GHz radio band on which the listed wireless client operates.
AP Hostname Displays the administrator assigned hostname of the Access Point to which this access point is
associated with.
Radio MAC Displays the MAC address of the radio which the wireless client is using.
WLAN Displays the name of the WLAN the wireless client is currently assigned for its Access Point
interoperation.