Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 249)

Brocade Mobility RFS Controller System Reference Guide 237
53-1003099-01
5
3. Select Advanced to expand its sub menu items.
4. Select MINT Protocol from the Advanced menu item.
FIGURE 118 Advanced Profile Overrides MINT screen - Settings tab
The Settings tab displays by default.
5. Refer to the Area Identifier field to define or override the Level 1 and Level 2 Area IDs used by
the profile’s MINT configuration.
6. Define or override the following Device Heartbeat Settings in respect to devices supported by
the profile:
7. Select the Latency of Routing Recalculation option (within the Shortest Path First (SPF) field) to
enable the spinner control used for defining or overriding a latency period (from 0 - 60
seconds). The default setting is disabled.
Level 1 Area ID Select the box to enable a spinner control for setting the Level 1 Area ID (1 - 16,777,215). The
default value is disabled.
Designated IS Priority
Adjustment Use the spinner control to set a Designated IS Priority Adjustment setting. This is the value added to
the base level DIS priority to influence the Designated IS (DIS) election. A value of +1 or greater
increases DISiness. The default setting is 0.