Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 773)

Brocade Mobility RFS Controller System Reference Guide 761
53-1003099-01
15
The Radio screens displays information on RF Domain member Access Point radios. Use these
screens to troubleshooting radio issues negatively impacting RF Domain performance.
For more information, refer to the following:
• Status
• RF Statistics
• Traffic Statistics
Status
To view the RF Domain radio statistics:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Expand Radios from the RF Domain menu and select Status.
FIGURE 15 RF Domain - Radio Status screen
The Radio Status screen displays the following:
Radio Displays the name assigned to each listed RF Domain member Access Point radio. Each name displays
as a link that can be selected to display radio information in greater detail.
Radio MAC Displays the MAC address as a numerical value factory hardcoded to each listed RF Domain member
Access Point radio.
Radio Type Defines whether the radio is operating within the 2.4 or 5 GHz radio band.
Access Point Displays the user assigned name of the RF Domain member Access Point to which the radio resides.
Brocade Mobility 7131 Access PointN models can have from 1-3 radios depending on the SKU. BR1220,
BR71XX, BR1240 models have two radios, while Brocade Mobility 6511 Access Point model has 1 radio.
AP Type Lists the model type of each RF Domain member Access Point.
State Displays the radio’s current operational state.