Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 542)

530 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
8
rfs6000-xxxxxx #configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
rfs6000-xxxxxx (config)#profile BR71XX Non-Root BR71XX
rfs6000-xxxxxx (config-profile-Non-Root-BR71XX)#misconfiguration-recovery-time 0
rfs6000-xxxxxx (config-profile-Non-Root-BR71XX)
Setting a Profile’s Environmental Sensor Configuration (BR1240
Only)
An BR1240 sensor module is a USB environmental sensor extension to an BR1240 model Access
Point. It provides a variety of sensing mechanisms, allowing the monitoring and reporting of the
BR1240's radio coverage area. The output of the sensor's detection mechanisms are viewable
using either the Environmental Sensor screen.
To set an environmental sensor configuration for an BR1240 model Access Point:
1. Select the Configuration tab from the Web UI.
2. Select Profiles from the Configuration tab.
3. Select Manage Profiles from the Configuration > Profiles menu.
4. Select Environmental Sensor.
FIGURE 98 Profile - Environmental Sensor screen