Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 860)

848 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Expand the Network menu from the left-hand side of the UI.
4. Select IGMP.
FIGURE 69 Wireless Controller - Network DHCP Options screen
The Group field describes the following:
The Multicast Router (MRouter) field describes the following:
VLAN Displays the group VLAN where the multicast transmission is conducted.
Group Address Displays the Multicast Group ID supporting the statistics displayed. This group ID is the multicast
address hosts are listening to.
Port Members Displays the ports on which multicast clients have been discovered. For example, ge1, radio1, etc. Ports
can vary somewhat amongst supported controller and service platform models.
Version Displays each listed group IGMP version compatibility as either version 1, 2 or 3.
VLAN Displays the group VLAN where the multicast transmission is conducted.
Learn Mode Displays the learning mode used by the router as either Static or PIM-DVMRP.
Port Members Displays the physical ports on which multicast clients have been discovered by the multicast router. For
example, ge1, radio1, etc. Ports can vary somewhat amongst supported controller and service platform
models.