Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 936)

924 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
2. Select System from the navigation pane (on the left-hand side of the screen), expand the
default node and select an Access Point for statistical observation.
3. Select OSPF.
4. Select the OSPF State tab.
FIGURE 126 Access Point OSPF - State tab
The OSPF State tab describes the following:
5. Select the Refresh button to update the statistics counters to their latest values.
L2TPv3 Tunnels
Access Point Statistics
OSPF state Displays the OSPF link state amongst neighbors within the OSPF topology. Link state information is
maintained in a link-state database (LSDB) which is a tree image of the entire network topology. Identical
copies of the LSDB are periodically updated through flooding on all OSPF supported nodes. Flooding is the
part of the OSPF protocol that distributes and synchronizes the link-state database between OSPF routers.
OSPF ignore state
count Lists the number of times state requests have been ignored between the Access Point and its peers within
this OSPF supported broadcast domain.
OSPF ignore state
monitor timeout Displays the timeout that, when exceeded, prohibits the Access Point from detecting changes to the OSPF link
state.
OSPF max ignore
state count Displays whether an OSPF state timeout is being ignored and not utilized in the transmission of state update
requests amongst neighbors within the OSPF topology.
OSPF max routes States the maximum number of routes negotiated amongst neighbors within the OSPF topology.
OSPF routes
received Lists the routes received and negotiated amongst neighbors within the OSPF topology.