Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 804)

792 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
To view the RF Domain captive portal statistics:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Select Captive Portal from the RF Domain menu.
FIGURE 30 RF Domain - Captive Portal
The screen displays the following Captive Portal data for requesting clients:
Controller Statistics
Statistics
Client MAC Displays the MAC address of each listed client requesting captive portal access to the controller or
service platform managed network. This address can be selected to display client information in
greater detail.
Hostname Lists the administrator assigned hostname of the device requesting captive portal access to
network’s Rf Domain resources.
Client IP Displays the IP address of each listed client using its connected RF Domain member Access Point
for captive portal access.
Captive Portal Lists the name of the RF Domain captive portal currently being utilized by each listed client.
Authentication Displays the authentication status of requesting clients attempting to connect to the controller or
service platform via the captive portal.
WLAN Displays the name of the WLAN the requesting client would use for interoperation with the
controller or service platform.
VLAN Displays the name of the VLAN the client would use as a virtual interface for captive portal
operation with the controller or service platform.
Remaining Time Displays the time after which a connected client is disconnected from the captive portal.
Refresh Select the Refresh button to update the statistics counters to their latest values.