Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 908)

896 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand the a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Expand the Adoption menu item.
4. Select Pending Adoptions.
FIGURE 106 Access Point - Pending Adoptions screen
The Pending Adoptions screen provides the following:
AP Detection
Access Point Statistics
The AP Detection screen displays potentially hostile Access Points, their SSIDs, reporting AP, and so
on. Continuously revalidating the credentials of detected devices reduces the possibility of an
Access Point hacking into the network.
To view the AP detection statistics:
1. Select the Statistics menu from the Web UI.
MAC Address Displays the MAC address of the device pending adoption.
Type Displays the Access Point’s model type.
IP Address Displays the current network IP Address of the device pending adoption.
VLAN Displays the current VLAN used as a virtual interface by device pending adoption.
Reason Displays the status as to why the device is still pending adoption and has not yet successfully connected
to this Access Point.
Discovery Option Displays the discovery option code for each AP listed pending adoption.
Last Seen Displays the date and time stamp of the last time the device was seen. Click the arrow next to the date
and time to toggle between standard time and UTC.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.