Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 915)

Brocade Mobility RFS Controller System Reference Guide 903
53-1003099-01
15
FIGURE 111 Access Point - Radio Status screen
The radio Status screen provides the following information:
RF Statistics
Use the RF Statistics screen to review Access Point radio transmit and receive statistics, error rate
and RF quality.
To view Access Point radio RF statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Expand the Radios menu item.
4. Select RF Statistics.
Radio Displays the name assigned to the radio as its unique identifier. The name displays in the form of a link
that can be selected to launch a detailed screen containing radio throughout data.
Radio MAC Displays the factory encoded hardware MAC address assigned to the radio.
Radio Type Displays the radio as either supporting the 2.4 or 5 GHZ radio band.
State Lists a radio’s On/Off operational designation.
Channel Current
(Config) Displays the configured channel each listed radio is set to transmit and receive on.
Power Current
(Config) Displays the configured power each listed radio is using to transmit and receive.
Clients Displays the number of connected clients currently utilizing the listed Access Point radio.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.