Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 65)

Brocade Mobility RFS Controller System Reference Guide 53
53-1003099-01
5
4. Set the following Management Security certificate configurations:
NOTE
Pending trustpoints and RSA keys are typically not verified as existing on a device.
5. Set the following RADIUS Security certificate configurations:
6. Select OK to save the changes made to the certificate configurations. Selecting Reset reverts
the screen to its last saved configuration.
For more information on the certification activities supported, refer to the following:
• Certificate Management
• RSA Key Management
• Certificate Creation
• Generating a Certificate Signing Request
Certificate Management
Assigning Certificates
A stored certificate can be leveraged from a different managed device if not wanting to use an
existing certificate or key. Device certificates can be imported and exported to and from the
controller or service platform to a secure remote location for archive and retrieval as required for
other managed devices.
To configure trustpoints for use with certificates:
1. Select Launch Manager from either the HTTPS Trustpoint, SSH RSA Key, RADIUS Certificate
Authority or RADIUS Server Certificate parameters.
HTTPS Trustpoint Either use the default trustpoint or select the Stored radio button to enable a drop-down menu where
an existing certificate/trustpoint can be utilized. To use an existing certificate for this device, select the
Launch Manager button. For more information, see
Certificate Management
SSH RSA Key Either use the default_rsa_key or select the Stored radio button to enable a drop-down menu where an
existing certificate can be used. To leverage an existing key, select the Launch Manager button. For
more information, see
RSA Key Management
RADIUS Certificate
Authority Either use the default-trustpoint or select the Stored radio button to enable a drop-down menu where
an existing certificate can be leveraged. To leverage an existing certificate, select the Launch Manager
button.
RADIUS Server
Certificate Either use the default-trustpoint or select the Stored radio button to enable a drop-down menu where
an existing certificate/trustpoint can be used. To leverage an existing trustpoint, select the Launch
Manager button.