Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 380)

368 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
7
For more information, refer to the following:
• Network Basic Alias
• Network Group Alias
• Network Service Alias
Network Basic Alias
A basic alias is a set of configurations consisting of VLAN, Host, Network and Address Range alias
configurations. A VLAN alias is a configuration for optimal VLAN re-use and management for local
and remote deployments. A host alias configuration is for a particular host device’s IP address. A
network alias configuration is utilized for an IP address on a particular network. An address range
alias is a configuration for a range of IP addresses.
To set a network basic alias configuration:
1. Select Configuration > Network from the Web UI.
2. Select Alias from the Network menu options on the left-hand side of the UI.
The Alias screen displays with the Basic Alias tab displayed by default.