Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 901)

Brocade Mobility RFS Controller System Reference Guide 889
53-1003099-01
15
FIGURE 101 Access Point - Device screen
The System field displays the following:
Model Number Displays the model of the selected Access Point to help distinguish its exact SKU and country of
operation.
Serial Number Displays the numeric serial number set for the Access Point.
Version Displays the software (firmware) version on the Access Point.
Boot Partition Displays the boot partition type.
Fallback Enabled Displays whether this option is enabled. This method enables a user to store a known legacy version and
a new version in device memory. The user can test the new software, and use an automatic fallback,
which loads the old version on the Access Point if the new version fails.
Fallback Image
Triggered Displays whether the fallback image was triggered. The fallback image is an old version of a known and
operational software stored in device memory. This allows a user to test a new version of software. If the
new version fails, the user can use the old version of the software.
Next Boot Designates this version as the version used the next time the AP is booted.