Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 763)

Brocade Mobility RFS Controller System Reference Guide 751
53-1003099-01
15
7. Refer to the Radio Quality table for RF Domain member radios requiring administration to
improve performance:
8. Refer to the Client Quality table for RF Domain connected clients requiring administration to
improve performance:
9. Refer to the WLAN Utilization field to assess the following:
10. The Radio Traffic Utilization area displays the following:
11. Refer to the Client Traffic Utilization table:
12. The Wireless Security area indicates the security of the transmission between WLANs and the
wireless clients they support. This value indicates the vulnerability of the WLANs.
Worst 5 Radios Displays five radios with the lowest average quality in the RF Domain.
Radio ID Lists each radio’s administrator defined hostname and its radio designation (radio 1, radio 2 or
radio 3).
Radio Type Displays the radio type as either 5 GHz or 2.4 GHz.
Worst 5 Clients Displays the five clients having the lowest average quality indices.
Client MAC Displays the hardcoded radio MAC of the wireless client.
Vendor Displays the vendor name of the wireless client.
Total WLANs Displays the total number of WLANs managed by RF Domain member Access Points.
Top 5 Displays the five RF Domain utilized WLANs with the highest average quality indices.
WLAN Name Displays the WLAN Name for each of the Top 5 WLANs in the Access Point RF Domain.
Radio Type Displays the radio type as either 5 GHz or 2.4 GHz.
Max. User Rate Displays the maximum recorded user rate in kbps.
Top 5 Radios Displays five radios with the best average quality in the RF Domain.
Radio ID Lists each radio’s administrator defined hostname and its radio designation (radio 1, radio 2 or
radio 3).
Radio Type Displays the radio type as either 5 GHz or 2.4 GHz.
Top 5 Clients Displays the five clients having the highest average quality indices.
Client MAC Displays the client’s hardcoded MAC address used a hardware identifier.
Vendor Lists each client’s manufacturer.
RF Domain Threat Level Indicates the threat from the wireless clients trying to find network vulnerabilities within the Access
Point RF Domain. The threat level is represented by an integer.
Rogue APs Lists the number of unauthorized Access Points detected by RF domain member devices.
WIPS Events Lists the number of WIPS events generated by RF Domain member devices.