Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 603)

Brocade Mobility RFS Controller System Reference Guide 591
53-1003099-01
10
MAC Firewall Rules If creating a new MAC Firewall rule, assign it a name (up to 64 characters) to help differentiate it from
others that may have similar configurations.
Allow Every MAC Firewall rule is made up of matching criteria rules. The action defines what to do with the
packet if it matches the specified criteria. The following actions are supported:
Deny - Instructs the Firewall to prohibit a packet from proceeding to its destination.
Permit - Instructs the Firewall to allow a packet to proceed to its destination.
VLAN ID Enter a VLAN ID representative of the shared SSID each user employs to interoperate within the network
(once authenticated by the local RADIUS server). The VLAN ID can be between1 and 4094.
Match 802.1P Configures IP DSCP to 802.1p priority mapping for untagged frames. Use the spinner control to define a
setting between 0-7.
Source / Destination
MAC Enter both Source and Destination MAC addresses as basic matching criteria.