Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 332)

320 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
6
FIGURE 38 Smart RF Policy screen
2. Refer to the following configuration data for existing Smart RF policies:
3. Select Add to create a new Smart RF policy, Edit to modify the attributes of a existing policy or
Delete to remove obsolete policies from the list of those available.
The Basic Configuration screen displays by default for the new or modified Smart RF
policy.
Smart RF Policy Displays the name assigned to the Smart RF policy when it was initially created. The name cannot
be modified as part of the edit process.
Smart RF Policy Enable Displays a green check mark if Smart RF has been enabled for the listed policy. A red “X”
designates the policy as being disabled.
Interference Recovery Displays a green check mark if interference recovery has been enabled for the listed policy. A red
“X” designates interference recovery being disabled.
Coverage Hole Recovery Displays a green check mark if coverage hole recovery has been enabled for the listed policy. A red
“X” designates coverage hole recovery being disabled.
Neighbor Recovery Displays a green check mark if neighbor recovery has been enabled for the listed policy. A red “X”
designates neighbor recovery being disabled.