Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 478)

466 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
8
FIGURE 53 Profile - Network Link Layer Discovery Protocol screen
4. Check the Enable LLDP box to enable Link Layer Discovery Protocol on the device.
5. Refer to the Hold Time field and use the spinner control to define a hold time from 10 - 1800
seconds for transmitted LLDP packets. The default value is 180 seconds.
6. Refer to the Timer field and use the spinner control to define the interval between 5 - 900
seconds to transmit LLDP packets. The default value is 60 seconds.
7. Enable Inventory Management Discovery to track and identify inventory attributes including
manufacturer, model or software version.
8. Enable Extended Power via MDI Discovery to provide detailed power information from end
points and other connected devices.
9. Select the OK button to save the changes. Select Reset to revert to the last saved
configuration.
Miscellaneous Network Configuration
Profile Network Configuration
A profile can be configured to include a hostname in a DHCP lease for a requesting device and its
profile. This helps an administrator track the leased DHCP IP address by hostname for the
supported device profile. When numerous DHCP leases are assigned, an administrator can better
track the leases when hostnames are used instead of devices.
To include a hostnames in DHCP request:
1. Select Configuration > Profiles > Network.
2. Expand the Network menu to display its submenu options
3. Select Miscellaneous.