Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 736)

724 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
14
15. Define the following configuration parameters required for the Export of the trustpoint.
16. Select OK to export the defined trustpoint. Select Cancel to revert the screen to its last saved
configuration.
17. To optionally delete a trustpoint, select the Delete button from within the Certificate
Management screen. Provide the trustpoint name within the Delete Trustpoint screen and
optionally select Delete RSA Key to remove the RSA key along with the trustpoint. Select OK to
proceed with the deletion, or Cancel to revert to the Certificate Management screen
RSA Key Management
Certificates
Refer to the RSA Keys screen to review existing RSA key configurations applied to managed
devices. If an existing key does not meet the needs of a pending certificate request, generate a new
key or import/export an existing key to and from a remote location.
Rivest, Shamir, and Adleman (RSA) is an algorithm for public key cryptography. It’s an algorithm
that can be used for certificate signing and encryption. When a device trustpoint is created, the
RSA key is the private key used with the trustpoint.
To review existing device RSA key configurations, generate additional keys or import/export keys to
and from remote locations:
1. Select RSA Keys tab from the Certificate Management screen.
Trustpoint Name Enter the 32 character maximum name assigned to the trustpoint. The trustpoint signing the certificate
can be a certificate authority, corporation or individual.
URL Provide the complete URL to the location of the trustpoint. If needed, select Advanced to expand the
dialog to display network address information to the location of the trustpoint. The number of additional
fields that populate the screen is dependent on the selected protocol.
Protocol Select the protocol used for exporting the target trustpoint. Available options include:
tftp
ftp
sftp
http
cf
usb1-4
Port Use the spinner control to set the port. This option is not valid for cf and usb1-4.
Host Provide the hostname or numeric IP address of the server used to export the trustpoint. This option is
not valid for cf and usb1-4.
Path/File Specify the path to the trustpoint. Enter the complete relative path to the file on the server.