Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 552)

540 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
8
14. Set the following VLAN parameters to complete the MINT configuration:
15. Select OK to save the updates to the MINT Protocol configuration. Select Reset to revert to the
last saved configuration.
Advanced Profile Miscellaneous Configuration
Advanced Profile Configuration
Refer to the advanced profile’s Miscellaneous menu item to set the profile’s NAS configuration. The
profile database on the RADIUS server consists of user profiles for each connected network access
server (NAS) port. Each profile is matched to a username representing a physical port. When users
are authorized, it queries the user profile database using a username representative of the
physical NAS port making the connection.
1. Select Miscellaneous from the Advanced Profile’s menu item.
VLAN Define a VLAN ID between 1 - 4,094 used by peers for interoperation when supporting the MINT
protocol.
Routing Level Use the spinner control to define a routing level of either 1 or 2.
Link Cost Use the spinner control to define a link cost between 1 - 10,000. The default value is 100.
Hello Packet Interval Set an interval in either Seconds (1 - 120) or Minutes (1 - 2) for the transmission of hello packets.
The default interval is 15 seconds.
Adjacency Hold Time Set a hold time interval in either Seconds (2 - 600) or Minutes (1 - 10) for the transmission of hello
packets. The default interval is 46 seconds.