Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 725)

Brocade Mobility RFS Controller System Reference Guide 713
53-1003099-01
14
Refer to the Status tab to review the progress of Captive Portal Pages upload.
Select Clear History to clear the history displayed in the Status tab and begin new data collections.
RAID Operations
Device Operations
An administrator can configure a NX9000 series RAID controller in respect to both its collective
drive array as well as individual drive behavior and diagnostics. The service platform’s array alarm
can silenced, drive LEDs can be illuminated and stopped, drive consistency (integrity) checks can
be made and the array can be prepared for drive replacements.
NOTE
RAID controller drive arrays are available within RFS9510 series service platforms only.
To administrate the service platform’s drive array and its member drives:
NOTE
The RAID tab is not available at the RF Domain level of the UI’s hierarchal tree. A RF Domain must
be selected and expanded to display the RF Domain’s member devices. Once expanded, selected a
RF Domain member RFS9510 model device to ensure the RAID option is available.
Select Operations > Devices > RAID.
Hostname Displays the hostname of the recipient device to which the captive portal files are directed.
MAC Displays the factory encoded MAC address of the recipient device.
State Displays the target device’s current operational state within the controller or service platform
managed network.
Progress Displays the completion progress of each captive portal upload operation.
Retries Lists the number of retries needed to upload the captive portal files to each listed device.
Last Status Displays the last known status of the captive portal page uploaded to each listed device.