Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 864)

852 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
The Link Layer Discovery Protocol screen displays the following:
DHCP Server
Controller Statistics
Controllers and service platforms contain an internal Dynamic Host Configuration Protocol (DHCP)
server. DHCP can provide IP addresses automatically. DHCP is a protocol that includes
mechanisms for IP address allocation and delivery of host-specific configuration parameters (IP
address, network mask gateway etc.) from a DHCP server to a host.
To review DHCP server statistics, refer to the following:
• Viewing General DHCP Information
• Viewing DHCP Binding Information
• Viewing DHCP Server Networks Information
Viewing General DHCP Information
DHCP Server
To view General DHCP status and binding information:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller from the left navigation pane.
3. Expand the DHCP Server menu from the left-hand side of the UI.
4. Select General.
Capabilities Displays the Access Point capabilities code as either Router, Trans Bridge, Source Route Bridge, Switch,
Host, IGMP or Repeater.
Device ID Displays the configured device ID or name for each device in the table.
Enabled Capabilities Displays which LLDP capabilities are currently utilized by the listed device.
Local Port Displays the physical local port name for each LLDP capable device.
Platform Displays the model number of the LLDP capable device.
Port ID Displays the identifier for the local port.
TTL Displays the time to live (TTL) for each LLDP connection.
Clear Neighbors Click Clear Neighbors to remove all known LLDP neighbors from the table.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.