Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 25)

Brocade Mobility RFS Controller System Reference Guide 13
53-1003099-01
Chapter
3
Quick Start
RFS4011 model controllers utilize an initial setup wizard to streamline getting on the network for
the first time. This wizard configures location, network and WLAN settings and assists in the
discovery of Access Points and their connected clients. For instructions on how to use the initial
setup wizard, see Using the Initial Setup Wizard on page 3-13.
Using the Initial Setup Wizard
Once deployed and powered on, complete the following to get the controller or service platform up
and running and access more advanced user interface functions:
1. Connect one end of an Ethernet cable to a port on the front of the controller or service
platform, and connect the other end to a computer with a working Web browser.
2. Set the computer to use an IP address between 192.168.0.10 and 192.168.0.250 on the
connected port. Set a
subnet/network mask of 255.255.255.0.
3. Once the computer has an IP address, point the Web browser to: https://192.168.0.1/. The
following login screen displays.
FIGURE 1 Web UI Login Screen
Enter the default username admin in the Username field.
4. Enter the default password admin123 in the Password field.
Select the preferred language to display for the graphical user interface (GUI).