Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 714)

702 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
14
Use the No Reboot option to keep from rebooting after an upgrade. Select Staggered
Reboot to avoid upgrading devices simultaneously and risk bringing down the network.
When selected, devices are rebooted incrementally to preserve network availability.
8. Use the All Devices table to select controller, service platform and Access Point models for
firmware updates from the device model selected from the Device Type List.
Refer to the MAC Address and Device Type values to help determine the specific models
available for upgrade within the RF domain. Use the Version and Upload Version values to
assess each listed device’s current firmware as well as the firmware version available to a
device upgrade.
9. Select Device Image File.
FIGURE 4 Device Image File screen
10. Select a controller, service platform or Access Point model from the Device Image Type
drop-down menu. Selecting All makes each controller, service platform and Access Point model
images available for updates on those specific models.
11. Select the Basic link to enter a URL pointing to the location of the controller, service platform or
Access Point image files for the device update(s).