Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 852)

840 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
5. Refer to the following List of Critical Resources: .
LDAP Agent Status
Controller Statistics
When LDAP has been specified as an external resource (as opposed to local RADIUS resources) to
validate PEAP-MS-CHAP v2 authentication requests, user credentials and password information
needs to be made available locally to successfully connect to the external LDAP server. Up to two
LDAP Agents (primary and secondary external resources) can be defined as external resources for
PEAP-MS-CHAP v2 authentication requests. For more information on setting LDAP agents as part of
the RADIUS server policy, see Configuring RADIUS Server Policies on page 11-643.
To view controller or service platform LDAP agent statistics:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select LDAP Agent Status from the left-hand side of the UI.
FIGURE 63 Wireless Controller - LDAP Agent Status screen
Critical Resource Name Lists the name of the resource being monitored by the controller or service platform.
Via Lists the VLAN used by the critical resource as a virtual interface. the VLAN displays as a link than
can be selected to list configuration and network address information in greater detail.
Status Defines the operational state of each listed critical resource VLAN interface (Up or Down).
Error Reason Provides an error status as to why the critical resource is not available over its designated VLAN.
Mode Defines the operational state of each listed critical resource (up or down).
Refresh Select Refresh to update the statistics counters to their latest values.