Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 854)

842 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
FIGURE 64 Wireless Controller – GRE Tunnel screen
The GRE Tunnels screen describes the following:
Dot1x
Controller Statistics
Dot1x (or 802.1x) is an IEEE standard for network authentication. Devices supporting Dot1x allow
the automatic provision and connection to the wireless network without launching a Web browser
at login. When within range of a Dot1x network, a device automatically connects and authenticates
without needing to manually login.
To view the Dot1x statistics:
1. Select the Statistics menu from the Web UI.
GRE State Displays the current operational state of the GRE tunnel.
Peer IP Address Displays the IP address of the peer device on the remote end of the GRE tunnel.
Tunnel Id Displays the session ID of an established GRE tunnel. This ID is only viable while the tunnel is
operational and does not carry to subsequent sessions.
Total Packets Received Displays the total number of packets received from a peer at the remote end of the GRE tunnel.
Total Packets Sent Displays the total number of packets sent from this controller or service platform to a peer at the remote
end of the GRE tunnel.
Total Packets Dropped Lists the number of packets dropped from tunneled exchanges between this controller or service
platform and a peer at the remote end of the VPN tunnel
Refresh Select the Refresh button to update the screen’s statistics counters to their latest value.