Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 172)

160 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
5
FIGURE 66 OSPF Interface Settings screen
17. Review the following Interface Settings:
18. Select the Add button to define a new set of virtual interface basic settings, or Edit to update
the settings of an existing virtual interface configuration.
Name Displays the name defined for the interface configuration.
Type Displays the type of interface.
Description Lists each interface’s 32 character maximum description.
Admin Status Displays whether admin status privileges have been enabled or disabled for the OSPF
route’s virtual interface connection.
VLAN Lists the VLAN IDs set for each listed OSPF route virtual interface.
IP Address Displays the IP addresses defined as virtual interfaces for dynamic OSPF routes. Zero
config and DHCP can be used to generate route addresses, or a primary and
secondary address can be manually provided.