beautypg.com

Device – Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 900

background image

888

Brocade Mobility RFS Controller System Reference Guide

53-1003099-01

15

The Radio RF Quality Index field displays the following:

The Radio Utilization field displays the following:

The Client RF Quality Index field displays the following:

4. Select the Refresh button as needed to update the screen’s statistics counters to their latest

values.

Device

Access Point Statistics

The Device screen displays basic information about the selected Access Point. Use this screen to
gather version information, such as the installed firmware image version, the boot image and
upgrade status.

To view the device statistics:

1. Select the Statistics menu from the Web UI.

2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF

Domain, select a controller or service platform, and select one of its connected Access Points.

3. Select Device.

RF Quality Index

Displays Access Point radios having very low quality indices. RF quality index indicates the overall RF
performance. The RF quality indices are:

0 – 50 (poor)

50 – 75 (medium)

75 – 100 (good)

Radio Id

Displays a radio’s hardware encoded MAC address The ID appears as a link that can be selected to show
radio utilization in greater detail.

Radio Type

Identifies whether the radio is a 2.4 or 5 GHz.

Total Bytes

Displays the total bytes of data transmitted and received by the Access Point since the screen was last
refreshed.

Total Packets

Lists the total number of data packets transmitted and received by the Access Point since the screen
was last refreshed.

Total Dropped

List the number of dropped data packets by an Access Point radio since the screen was last refreshed.

Worst 5

Displays clients having lowest RF quality within the network.

Client MAC

Displays the MAC addresses of the clients with the lowest RF indices.

Retry Rate

Displays the average number of retries per packet. A high number indicates possible network or
hardware problems.