Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 562)

550 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
9
FIGURE 3 RF Domain - Sensor WIPS screen
3. Either select the + Add Row button to create a new WIPS server configuration or highlight an
existing Sensor Server Configuration and select the Delete icon to remove it.
4. Use the spinner control to assign a numerical Server ID to each WIPS server defined. The
server with the lowest defined ID is the first reached by the controller or service platform. The
default ID is 1.
5. Provide the numerical (non DNS) IP Address or hostname of each server used as a WIPS
sensor server by RF Domain member devices.
6. Use the spinner control to specify the Port of each WIPS server utilized by RF member devices.
The default port is 443.
7. Select OK to save the changes to the AirDefense WIPS configuration, or select Reset to Revert
to the last saved configuration.
RF Client Name Configuration
The Client Name Configuration screen displays clients connected to RF Domain member Access
Points adopted by networked controllers or service platforms. Use the screen to associate
administrator assigned client names to specific connected client MAC addresses for improved
client management.
To define a client name configuration used with RF Domain member devices:
1. From the RF Domain screen, either select the Add button or highlight an existing policy and
select Edit.
An existing policy can also be modified by selecting it directly from the RF Domain browser.
2. Select the Client Name Configuration item from within the RF Domain screen.