Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 67)

Brocade Mobility RFS Controller System Reference Guide 55
53-1003099-01
5
FIGURE 6 Certificate Management - Import New Trustpoint screen
5. Define the following configuration parameters required for the Import of the trustpoint.
6. Select OK to import the defined trustpoint. Select Cancel to revert the screen to its last saved
configuration.
7. To optionally import a CA certificate, select the Import CA button from the Certificate
Management screen.
Trustpoint Name Enter the 32 character maximum name assigned to the target trustpoint. The trustpoint signing the
certificate can be a certificate authority, corporation or individual.
URL Provide the complete URL to the location of the trustpoint. If needed, select Advanced to expand the
dialog to display network address information to the location of the target trustpoint. The number of
additional fields that populate the screen is also dependent on the selected protocol.
Protocol Select the protocol used for importing the target trustpoint. Available options include:
tftp
ftp
sftp
http
cf
usb1-4
Port Use the spinner control to set the port. This option is not valid for cf and usb1-4.
Host Provide the hostname string or numeric IP address of the server used to import the trustpoint. This
option is not valid for cf and usb1-4.
Path/File Specify the path to the trustpoint file. Enter the complete relative path to the file on the server.
Cut and Paste Select the Cut and Paste radio button to simply copy an existing trustpoint into the cut and past field.
When pasting, no additional network address information is required.