Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 734)

722 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
14
FIGURE 19 Import New Trustpoint - Import Signed Cert
12. Define the following parameters required for the Import of the Signed Certificate:
Trustpoint Name Enter the 32 character maximum trustpoint name with which the certificate should be associated.
From Network Select the From Network radio button to provide network address information to the location of the
signed certificate. The number of additional fields that populate the screen is dependent on the
selected protocol. From Network is the default setting.
URL Provide the complete URL to the location of the signed certificate. If needed, select Advanced to expand
the dialog to display network address information to the location of the signed certificate. The number
of additional fields populating the screen is dependent on the selected protocol.
Protocol Select the protocol for importing the signed certificate. Available options include:
tftp
ftp
sftp
http
cf
usb1-4
Port Use the spinner control to set the port. This option is not valid for cf and usb1-4.
Host Provide the hostname or numeric IP address of the server used to export the trustpoint. This option is
not valid for cf and usb1-4.
Path/File Specify the path to the signed certificate. Enter the complete relative path to the file on the server.
Cut and Paste Select the Cut and Paste radio button to simply copy an existing signed certificate into the cut and past
field. When pasting a signed certificate, no additional network address information is required.