Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 817)

Brocade Mobility RFS Controller System Reference Guide 805
53-1003099-01
15
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select Adoption > Pending Adoptions from the left-hand side of the UI.
FIGURE 38 Wireless Controller - Pending Adoptions screen
The Pending Adoptions screen provides the following
AP Detection
Controller Statistics
The AP Detection screen displays potentially hostile Access Points, their SSIDs, reporting AP, and so
on. Continuously revalidating the credentials of detected devices reduces the possibility of an
Access Point hacking into the controller or service platform managed network.
To view AP detection statistics:
1. Select the Statistics menu from the Web UI.
MAC Address Displays the MAC address of the device pending adoption.
Type Displays the AP’s model type.
IP Address Displays the current IP address of the device pending adoption.
VLAN Displays the current VLAN number (virtual interface ID) of the device pending adoption.
Reason Displays the status code as to why the device is still pending adoption.
Discovery Option Displays the discovery option code for each AP listed pending adoption.
Last Seen Displays the date and time stamp of the last time the device was seen. Click the arrow next to the date
and time to toggle between standard time and UTC.
Add to Devices Select a device from amongst those displayed and select Add to Devices to validate the adoption of the
selected device and begin the process of connecting the device to the controller or service platform
managed network.
Refresh Select Refresh to update the statistics counters to their latest values.