Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 427)

Brocade Mobility RFS Controller System Reference Guide 415
53-1003099-01
8
Access Point Radio Configuration
Profile Interface Configuration
Access Points can have their radio configurations modified by once their radios have successfully
associated to an adopting. Take care not to modify an Access Point’s configuration using its
resident Web UI, CLI or SNMP interfaces when managed by a profile, or risk the Access Point having
a configuration independent from the profile until the profile can be uploaded to the Access Point
again.
To define a Access Point radio configuration from the Access Point’s associated controller or
service platform:
1. Select Configuration > Profiles > Interface.
2. Expand the Interface menu to display its submenu options.
3. Select Radios.
FIGURE 21 Access Point - Radios screen
4. Review the following to determine whether a radio configuration requires modification to better
support the managed network:
Name Displays whether the reporting radio is the Access Point’s radio1, radio2 or radio3. BR7131N models
support from 1-3 radios. All other Brocade Access Points are dual radio models, with the exception of
BR6511 model which are single radio models.
Type Displays the type of radio housed by each listed Access Point.
Description Displays a brief description of the radio provided by the administrator when the radio’s configuration
was added or modified.