Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 853)

Brocade Mobility RFS Controller System Reference Guide 841
53-1003099-01
15
The LDAP Agent Status screen displays the following:
GRE Tunnels
Controller Statistics
Generic Routing Encapsulation (GRE) is one of the available tunneling mechanisms which uses IP
as the transport protocol and can be used for carrying many different passenger protocols. The
tunnels behave as virtual point-to-point links that have two endpoints identified by the tunnel
source and tunnel destination addresses at each endpoint.
Use the GRE Tunnel screen to view information on the traffic flow in a GRE tunnel.
To view the GRE Tunnel statistics:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select GRE Tunnels from the left-hand side of the UI.
LDAP Agent Primary Lists the primary IP address of a remote LDAP server resource used by the controller or service
platform to validate PEAP-MS-CHAP v2 authentication requests. When a RADIUS server policy’s
data source is set to LDAP, this is the first resource for authentication requests.
LDAP Agent Secondary Lists the secondary IP address of a remote LDAP server resource used by the controller or service
platform to validate PEAP-MS-CHAP v2 authentication requests. When a RADIUS server policy’s
data source is set to LDAP, this is the second resource for authentication requests.
Message Displays any system message generated in the controller or service platform’s connection with the
primary or secondary LDAP agent. If there’s a problem with the username and password used to
connection to the LDAP agent it would be listed here.
Status Displays whether the controller or service platform has successfully joined the remote LDAP server
domain designated to externally validate PEAP-MS-CHAP v2 authentication requests.
Refresh Select Refresh to update the statistics counters to their latest values.