Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 327)

Brocade Mobility RFS Controller System Reference Guide 315
53-1003099-01
6
FIGURE 35 Radio QoS Policy Multimedia Optimizations screen
17. Set the following Accelerated Multicast settings for this radio QoS policy:
Define the following Smart Aggregation settings:
Smart Aggregation enhances frame aggregation by dynamically selecting the time when
the aggregated frame is transmitted. In a frame’s typical aggregation, an aggregated
frame is sent when it meets one of these conditions:
• When a preconfigured number of aggregated frames is reached
• When an administrator defined interval has elapsed since the first frame (of a set of
frames to be aggregated) was received
• When an administrator defined interval has elapsed since the last frame (not necessarily
the final frame) of a set of frames to be aggregated was received
Maximum number of
wireless clients allowed Specify the maximum number of wireless clients (between 0 and 256) allowed to use accelerated
multicast. The default value is 25.
When wireless client count
exceeds the above limit When the wireless client count using accelerated multicast exceeds the maximum number, set the
radio to either Reject new wireless clients or Revert existing clients to a non-accelerated state.
Maximum multicast
streams per client Specify the maximum number of multicast streams (between 1 and 4) wireless clients can use. The
default value is 2.
Packets per second for
multicast flow for it to be
accelerated Specify the threshold of multicast packets per second (between 1 and 500) that triggers
acceleration for wireless clients. The default value is 25.
Timeout for wireless
clients Specify a timeout value in seconds (between 5 and 6,000) for wireless clients to revert back to a
non-accelerated state. The default value is 60.