Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 87)

Brocade Mobility RFS Controller System Reference Guide 75
53-1003099-01
5
16. Select OK to save the changes and overrides made to the Sensor Appliance Configuration.
Selecting Reset reverts the screen to its last saved configuration.
17. Select WLAN Override from within the expanded RF Domain Overrides.
NOTE
The WLAN Override option does not appear as a sub menu option under RF Domain Overrides for
either controllers or service platforms, just Access Points.
FIGURE 20 WLAN Override screen - Override SSID tab
The WLAN Override screen displays with the Override SSID tab displayed by default.
18. Optionally define up to 3 overrides for the listed Access Point’s WLAN SSID assignment:
19. Select the Add Row + button as needed to add additional WLAN SSID overrides.
NOTE
A blue override icon (to the left of a parameter) defines the parameter as having an override applied.
To remove an override go to the Basic Configuration section of the device and click the Clear
Overrides button. This removes all overrides from the device.
WLAN Optionally use the drop-down menu to change the WLAN assignment for the listed
Access Point. Select either the Create icon to define a new WLAN configuration, or
select the Edit icon to modify an existing WLAN configuration.
SSID Optionally change the SSID associated with the WLAN. The WLAN name is
auto-generated using the SSID until changed (overridden). The maximum number
of characters used for the SSID is 32.