Offline devices – Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 755
Brocade Mobility RFS Controller System Reference Guide
743
53-1003099-01
15
FIGURE 4
System - Pending Adoptions screen
The Pending Adoptions screen displays the following:
Offline Devices
The Offline Devices screen displays a list of devices in the controller or service platform managed
network or RF Domain that are currently offline. Review the contents of this screen to help
determine whether an offline status is still warranted.
MAC Address
Displays the MAC address of the device pending adoption. Select the MAC address to view device
configuration and network address information in greater detail.
Type
Displays the AP type.
IP Address
Displays the current IP Address of the device pending adoption.
VLAN
Displays the VLAN the device pending adoption will use as a virtual interface with its adopting controller
or service platform.
Reason
Displays a status (reason) as to why the device is pending adoption.
Discovery Option
Displays the discovery option code for each AP listed pending adoption.
Last Seen
Displays the date and time stamp of the last time the device was seen. Click the arrow next to the date
and time to toggle between standard time and UTC.
Add to Devices
Select a listed AP and select the Add to Devices button to begin the adoption process for this detected
AP.
Refresh
Click the Refresh button to update the list of pending adoptions.