Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 602
590
Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
10
17. Select OK to save the updates to the Inbound or Outbound IP Firewall rule. Select Reset to
revert to the last saved configuration.
18. If required, select existing Inbound and Outbound MAC Firewall Rules using the drop-down
menu. If no rules exist, select Create to display a screen where Inbound or Outbound Firewall
rules can be created.
19. Define the following parameters required to create an Inbound or Outbound MAC Firewall rule:
ICMP Code
Selecting ICMP as the protocol for the IP rule displays an additional set of ICMP specific options for ICMP
type and code. Many ICMP types have a corresponding code, helpful for troubleshooting network issues
(0 - Net Unreachable, 1 - Host Unreachable, 2 - Protocol Unreachable etc.).
Start VLAN
Select a Start VLAN icon within a table row to set (apply) a start VLAN range for this IP ACL filter. The Start
VLAN represents the virtual LAN beginning numeric identifier arriving packets must adhere to in order to
have the IP ACL rules apply.
End VLAN
Select an End VLAN icon within a table row to set (apply) an end VLAN range for this IP ACL filter. The End
VLAN represents the virtual LAN end numeric identifier arriving packets must adhere to in order to have
the IP ACL rules apply.
Mark
Select an IP Firewall rule’s Mark checkbox to enable or disable event marking and set the rule’s 8021p or
dscp level (from 0 - 7).
Log
Select an IP Firewall rule’s Log checkbox to enable or disable event logging for this rule’s usage.
Enable
Select an IP Firewall rule’s Enable or Disable icon to determine this rule’s inclusion with the IP firewall
policy.
Description
Lists the administrator assigned description applied to the IP ACL rule. Select a description within the
table to modify its character string as filtering changes warrant. Select the icon within the Description
table header to launch a Select Columns screen used to add or remove IP ACL criteria from the table.