Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 815
Brocade Mobility RFS Controller System Reference Guide
803
53-1003099-01
15
•
•
To view device adoption statistics:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select Adoption > Adopted
Devices
from the left-hand side of the UI.
FIGURE 36
Wireless Controller - Adopted APs screen
The Adopted Devices screen displays the following:
Device
Displays the name assigned to the adopted device by the management software. The Access Point
name displays as a link that can be selected to display configuration and network address
information in greater detail.
Type
Lists the model type of each Access Point managed by the selected controller or service platform
(the controller or service platform listed in the Adopter Hostname column).
RF Domain Name
Displays the RF Domain memberships of each listed adopted device.
Model Number
Displays the controller (Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000.) or service platform (NX4500, NX4524, NX6500, NX6524 or NX9000 series) model
type.
Status
Lists whether an adopted Access Point has been configured (provisioned) by its connected Access
Point or service platform.
Errors
Lists any errors encountered when the each listed Access Point was adopted by the controller or
service platform.
Adopter Hostname
Lists the hostname assigned to the adopting controller or service platform.
Adoption Time
Displays a timestamp for each listed Access Point reflecting when the device was adopted by the
controller or service platform.
Startup Time
Lists the time the adopted device was last started up and detected on the network.
Refresh
Select the Refresh button to update the screen’s statistics counters to their latest values.