Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 731)

Brocade Mobility RFS Controller System Reference Guide 719
53-1003099-01
14
FIGURE 17 Import New Trustpoint - Import CA screen
Define the following configuration parameters required for the Import CA of the CA certificate:
Trustpoint Name Enter the 32 character maximum name assigned to the target trustpoint signing the certificate. A
trustpoint represents a CA/identity pair containing the identity of the CA, CA specific configuration
parameters, and an association with an enrolled identity certificate.
URL Provide the complete URL to the location of the trustpoint. If needed, select Advanced to expand the
dialog to display network address information to the location of the target trustpoint. The number of
additional fields populating the screen is dependent on the selected protocol.
Advanced / Basic Click the Advanced or Basic link to switch between a basic URL and an advanced location to specify
trustpoint location.
Protocol Select the protocol used for importing the target CA certificate. Available options include:
tftp
ftp
sftp
http
cf
usb 1-4
Port Use the spinner control to set the port. This option is not valid for cf and usb1 - 4.
Host Provide the hostname or numeric IP address of the server used to export the trustpoint. This option is
not valid for cf and usb1-4.
Path/File Specify the path or filename of the CA certificate. Enter the complete relative path to the file on the
server.
Cut and Paste Select the Cut and Paste radio button to simply copy an existing trustpoint into the cut and past field.
When pasting, no additional network address information is required.