Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 953)

Brocade Mobility RFS Controller System Reference Guide 941
53-1003099-01
15
4. Select Link Layer Discovery.
FIGURE 139 Access Point - Network LLDP screen
The Link Layer Discovery Protocol screen displays the following:
DHCP Server
Access Point Statistics
Access Points contain an internal Dynamic Host Configuration Protocol (DHCP) server. DHCP can
provide IP addresses automatically. DHCP is a protocol that includes mechanisms for IP address
allocation and delivery of host-specific configuration parameters (IP address, network mask
gateway etc.) from a DHCP server to a host.
To view DHCP server statistics:
1. Select the Statistics menu from the Web UI.
Capabilities Displays the capabilities code for the device as either Router, Trans Bridge, Source Route Bridge, Host,
IGMP or Repeater.
Device ID Displays the configured device ID or name for each device in the table.
Enabled Capabilities Displays which device capabilities are currently enabled.
Local Port Displays the local port name (Access Point physical port) for each LLDP capable device. Supported
Access Point models have unique port configurations.
Platform Displays the model number of the LLDP capable device interoperating with the Access Point.
Port ID Displays the identifier for the local port.
TTL Displays the time to live (TTL) for each LLDP connection.
Clear Neighbors Select Clear Neighbors to remove all known LDP neighbors from the table.
Refresh Select Refresh to update the statistics counters to their latest values.