Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 71)

Brocade Mobility RFS Controller System Reference Guide 59
53-1003099-01
5
FIGURE 9 Certificate Management - Import Signed Cert screen
13. Define the following parameters required for the Import of the CA certificate:
Certificate Name Enter the 32 character maximum trustpoint name with which the certificate should be
associated.
From Network Select the From Network radio button to provide network address information to the
location of the signed certificate. The number of additional fields that populate the
screen is dependent on the selected protocol. From Network is the default setting.
URL Provide the complete URL to the location of the signed certificate. If needed, select
Advanced to expand the dialog to display network address information to the location
of the signed certificate. The number of additional fields populating the screen is
dependent on the selected protocol.
Protocol Select the protocol for importing the signed certificate. Available options include:
tftp
ftp
sftp
http
cf
usb1-4
Port Use the spinner control to set the port. This option is not valid for cf and usb1-4.
Host Provide the hostname string or numeric IP address of the server used to import the
signed certificate. This option is not valid for cf and usb1-4.
Path/File Specify the path to the signed certificate file. Enter the complete relative path to the file
on the server.
Cut and Paste Select the Cut and Paste radio button to simply copy an existing certificate into the cut
and past field. When pasting, no additional network address information is required.