Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 823)

Brocade Mobility RFS Controller System Reference Guide 811
53-1003099-01
15
To view the radio statistics:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select Radio from the left-hand side of the UI.
FIGURE 43 Wireless Controller - Radio Status screen
The Radios Status screen provides the following information:
4. Select RF Statistics from the expanded Radios menu.
Radio Displays the model and numerical value assigned to the radio as its unique identifier. Optionally, select
the listed radio (it displays as a link) to display radio configuration information in greater detail.
Radio MAC Displays the MAC address assigned to the radio as its unique hardware identifier.
Radio Type Defines whether the radio is operating in the 2.4 GHz or 5 GHz radio band.
Access Point Displays the administrator assigned system name of each listed Access Point. Optionally, select the
listed Access Point to display Access Point configuration information in greater detail.
AP Type Lists the model type of the Access Point housing the listed radio.
State Displays the current operational state (On/Off) of each radio.
Channel Current
(Config) Displays the administrator configured channel each listed radio is broadcasting on.
Power Current
(Config) Displays the administrator configured power level the radio is using for its transmissions.
Clients Displays the number of wireless clients associated with each listed radio.
Refresh Select Refresh to update the statistics counters to their latest values.