Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 378)

366 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
7
14. Set the following AAA TACACS Accounting server configuration parameters:
Set the following AAA TACACS Authentication server configuration parameters:
Set the following AAA TACACS Authorization server configuration parameters:
Access Method Specify access methods for accounting server connections.
•
All – Accounting is performed for all types of access with none given priority.
•
Console – Accounting is performed for console access only.
•
SSH – Accounting is performed only for access through SSH.
•
Telnet – Accounting is performed only for access through Telnet.
Server Preference Specify how an accounting server is selected from the server pool for accounting connection
requests.
•
None – No preference in the selection of server an accounting server is considered.
•
authenticated-server-host – Prefers the same server host as the authentication server.
•
authenticated-server-number – Prefers the server with the same index used as the
authentication server. For example, if the index of the server used for authentication server
was One (1), then use the accounting server with the index One (1).
•
authorized-server-host – Prefers the server host used as the authorization server.
•
authorized-server-number – Prefers the server with the same index as used as the
authorization server. For example, if the index of the server used for authorization server was
One (1), then use the accounting server with the index One (1).
Authentication Failure Select the option to enable accounting upon authentication failures. This setting is disabled by
default.
CLI Commands Select this option to enable accounting for CLI commands. This setting is disabled by default.
Session Select this option to enable accounting for session start and session stop events. This setting is
disabled by default.
Authentication Access
Method Specify the connection methods for authentication requests.
•
All – Authentication is performed for all types of access without prioritization.
•
Console – Authentication is performed only for console access.
•
SSH – Authentication is performed only for access through SSH.
•
Telnet – Authentication is performed only for access through Telnet.
•
Web – Authentication is performed only for access through the Web interface.
Directed Request Select to enable the AAA TACACS authentication server to be used with the ‘@’
nomenclature. The specified server must be present in the list of defined Authentication servers.
Authorization Access
Method Specify the connection methods for authorization requests:
•
All – Authorization is performed for all types of access without prioritization.
•
Console – Authorization is performed only for console access.
•
SSH – Authorization is performed only for access through SSH.
•
Telnet – Authorization is performed only for access through Telnet.
Server Specifies how an authorization server is selected from the server pool:
•
None – No preference is used in the selection of an authorization server.
•
authenticated-server-host – Prefers the same server host as the authentication server.
•
authenticated-server-number – Prefers the server index as the authentication server. For
example, if the index of the server used for authentication server was One (1), then use the
authorization server with the index One (1).
Allow Privileged
Commands Select this option to enable privileged commands executed without command authorization.
Privileged commands are commands that can alter/change the authorization server configuration.