Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 415)

Brocade Mobility RFS Controller System Reference Guide 403
53-1003099-01
8
FIGURE 13 Virtual Interfaces - Security screen
13. Use the Inbound IP Firewall Rules drop-down menu to select the firewall rule configuration to
apply to this Virtual Interface.
The firewall inspects and packet traffic to and from connected clients.
If a firewall rule does not exist suiting the data protection needs of this Virtual Interface, select
the Create icon to define a new firewall rule configuration or the Edit icon to modify an existing
configuration. For more information, see
Wireless Firewall .
14. Use the VPN Crypto Map drop-down menu to select the Crypto Map configuration to apply to
this Virtual Interface.
Crypto Map entries are sets of service platform configuration parameters for encrypting
packets that pass through the VPN Tunnel. If a Crypto Map configuration does suit the needs of
this service platform Virtual Interface, select the Create icon to define a new Crypto Map
configuration or the Edit icon to modify an existing configuration. For more information, see
Setting the Profile’s VPN Configuration .
15. Select the OK button located at the bottom right of the screen to save the changes to the
Security screen. Select Reset to revert to the last saved configuration.
Port Channel Configuration
Profile Interface Configuration
Profiles can be applied customized port channel configurations as part of their Interface
configuration.
To define a port channel configuration for a profile: